Product Description
Steel Structure/Container/Prefabricated/Prefab/Mobile/Portable/Modular House for Industrial and Residential Applications
Product Information
I.Pre-engineered steel structure House/Building
A pre-engineered building (PEB) also called Pre-Engineered Metal Buildings (PEMB) or simply Engineered Metal Buildings (EMB) is a steel structure built over a structural concept of primary and secondary members, and roof sheeting connected to each other. The structural members are custom designed to be high in strength as well as lighter in weight.
At present Steel is the material of choice for all in building construction, compared to concrete and timber. Thus steel building designs have become more flexible, durable and adaptable. In future too the choice of steel building will have the same effect as on today.
A.PRE ENGINEERED BUILDING CONSISTS OF FOLLOWING MAIN COMPONENTS::
Primary Sections Column,Rafters
Secondary Sections Purlins, Tie rods, Eave Strut, Rake angles, Girts
Cranes and Mazzanines.
Roofing and Cladding Roof Panel and Wall Panel
Accessories Canopy, Turbo Vent, Ridge Vent, Gutters, Crane Runways,
Insulations, Louvers, Roof curb, Sealants, Fasteners etc
B.USE OF PEB
PEB concept has been very successful and well established in North America, Australia and is presently expanding in U.K and other European countries. PEB is ideal for construction in remote & hilly areas due to its low cost and fast completion. PEB concept has acted as a catalyst in the infrastructure development of the country. Single storied houses for residential purposes take minimum time for construction and can be built in any type of geographic location like extreme hot, extreme cold hilly areas, high rain prone areas, plain land and seismic zones etc. The PEB rigid frame comprises of built-up members with tapered or straight columns and tapered rafters. The frame is erected by bolting the end plates of connecting sections together.
C.APPLICATION
Pre-engineered building systems finds primary application in construction of Warehouses and construction of Industrial Buildings. The recent focus has also shifted to cover Rural as well as urban, individual and mass housing projects, farmhouses and slum rehabilitation projects.
Application of pre-engineered steel buildings has also included the following:
PEB Structures are fabricated to the end user's requirement in a factory and erected at site, which leads to saving of time.
PEB is ideal for Factory Buildings, Warehouses, Aircraft Hangars, Indoor Stadiums, Fuel Stations, Metro Stations, Bus Terminals, Parking Lots, Schools, and Outdoor Stadiums with canopies where the intermediate columns are to be avoided.
PEB is ideal for Show Rooms, Office Complexes, Commercial Complexes & Supermarkets.
PEB is ideal for Labour Camps, Community Centers, Equipment housing , Telecommunication shelters, Airports, Railway Stations & Railway Storage yards, Exhibition Halls etc. due to its aesthetics look.
PEB is ideal for buildings in City Area where land cost is too high.
PEB is ideal for buildings that need to be relocated to other places.
PEB is ideal for buildings that are to be built faster.
PEB is ideal for Residential Sectors .
PEB is ideal for Buildings that need to be expanded in future
D.THE MATERIAL SPECIFICATIONS OF PEB MEMBERS ARE AS BELOW:
PRIMARY BUILT UP MEMBERS
High grade steel plate conforming to ASTM A572M Grade 345 Type 1 carrying minimum Yield Strength of 34.5kN/cm2. It is factory Pained with a Minimum of 40 microns (DFT) of red oxide primer.
SECONDARY MEMBERS:
Galvanized high grade steel conforming to ASTM A653 Structural quality Grade 50 with zinc coating G90, Available in 1.5 mm, 1.75 mm, 2.0 mm and 2.5 mm thicknesses having minimum Yeild Strength as 34.5 kN/cm2.
BRACING SYSTEMS :
M.S. Rod bracing shall conform to Structural Components of ASTM A36 Grade 36 or equivalent with minimum yield stress of 34.5KN/cm2.
SPECIFICATION OF STEEL:
Flange & web material for buildup section of all PEB structural member are fabricated from high grade steel plate conforming IS: 2062, ASTM AS 572 50, Grade 345 type. Purlins are secondary members of steel structure are cold formed Z & C shaped section are made of high grade steel conforming to ASTM A607 grade 50.
E.FABRICATION CAPABILITIES TO MEET CLIENT NEEDS
It is the practice of assembling components of a structure in a place and transporting complete assemblies or sub-assemblies to the site where the structure is to be located. Off-site fabrication offers advantages to help achieve significant time and cost savings, support fast-track project schedules and reduce risks such as adverse weather conditions and labor shortages.
Shiva Infra's comprehensive knowledge of EPC and project management (PM) allows us to optimize Clients' overall fabrication and construction configuration for cost and schedule advantages.
Pre Engineered Buildings offered by us are based on PEB concept, and are widely known for their exclusive designs and compactness. Our range of Pre Engineered Buildings includes PEB, Prefab Buildings, Industrial Sheds, Prefab Sheds, Metal Roofing, Wall Cladding, Metal Decking, Cee-Zed Purlins, PUF Panels, Insulated Sandwitch Panels, Metal False Ceiling, Turbo Roof Vents, Insulation and FRP-Polycarbonate Sheets.
We specialize to offer construction of heavy machine foundations for Retrofitting of Construction. With the support of our expertise, we undertake these projects, which helps make the foundation more strong, enabling it to bear heavy weight and ensure resistance against any natural hazards.
Due to the many decades of experience thus gained in design, manufacture, transport and installation, we have and will continue to develop systems which have proven themselves outstandingly in modern prefabricated element and system-oriented construction. Vast storage areas allow an economic production capacity utilization as well as stockkeeping in line with the requirements of a building site.
F.Advantages of Fabrication
Early fabrication design to improve constructability
Modularization-specific designs
Focused material and equipment procurement planning to support off-site fabrication
Advanced sourcing methods / Established global supplier partners (SRA)
Global market knowledge / Global purchasing volume
Supply chain / Logistics / Expediting
Quality control / Quality assurance
We offer a flexible approach to fabrication solutions, with a range of fabrication options to fit Clients' specific needs.
Thanks to experienced engineers and technicians and well thought-out logistics processes, we are able to guarantee our clients maximum quality and on-time delivery. These prerequisites enable our group of companies to continue and to increase their efforts to develop further innovative prefabricated element sytems into the future despite keen competition, and to respond with flexibility to all market requirements.
Advantages |
|
Faster installation |
Single source responsibility |
Lower cost |
Flexibility in expansion |
Large clear spans |
Quality control |
Low maintenance |
Energy efficient roof and wall systems |
Architectural versatility |
Optimized design of steel reducing weight |
Quick delivery and Quick turn-key construction. |
Water-tight roofs & wall coverings |
Pre-painted and has low maintenance requirement. |
The building can be dismantled and relocated easily. |
Clear spans up to 100m without internal columns |
Flexibility in building dimensions |
Fixed deadlines and costs |
|
Weather-tight roof and wall coverings with accessories for long maintenance free exteriors. |
Name
|
Specification
|
Length
|
Single slope, double slope, muti slope
|
Width
|
Single span, double-span, Multi-span
|
Height
|
single floor, double floors
|
Column
|
Q235, Q345 welding H section steel
|
Beam
|
Q235, Q345 welding H section steel
|
Purlin
|
Q235 C channel or Z channel
|
Knee brace
|
Q235 angle steel
|
Vertical and transversal support
|
Q235 angle steel, round bar or steel pipe
|
Tie ba r
|
Q235 steel pipe
|
Brace
|
Q235 round bar
|
Sleeve
|
Q235 steel pipe
|
Cladding system
|
sandwich panels (EPS, PU, Fiber glass wool etc.) or can use corrugated steel sheet
with fiber glass wool insulation and steel wire gauze.
|
Pa r tition wall
|
sandwich panels (EPS, PU, Fiber glass wool etc.)
|
Second floor
|
floor deck
|
Second floor office
|
fiber cement board floor panel or checkered steel plate
|
Stair:
|
Q235 steel structure with checkered steel plate
|
Ventilation:
|
ventilator
|
Door
|
sandwich panel sliding door or roller door
|
Windows
|
PVC or Aluminum
|
Water
|
Provided plan, design and technical service.
|
Electricity
|
Provided plan, design and technical service.
|
Gutter
|
stainless steel or color steel sheet
|
Rainspout:
|
PVC
|
Live load on roof
|
In 120kg/Sqm (Color steel panel surrounded)
|
Wind resistance grade
|
12
|
Earthquake-resistance
|
8degree
|
II.Container/Modular/PortableMobile House
| ISO standard dimensions of 20 feet KXD and STANDARD containers - optionally 10 up to 30 feet |
| lenght = 6.058 mm (optionally 3.048 - 9.100 mm) |
| width = 2.438 mm (optionally 3.000 mm) |
| exterior height = 2.591 mm (optionally 2.791 mm or 3100 mm) |
| inner height = 2.300 mm (optionally 2.500 mm or 2800 mm) |
| container construction difference |
| ZINCED metal profyles 3 mm connected with scres |
| container painting |
| option: on customer wish in RAL color |
| option: painted on customer wish in RAL color |
| without forklift pockets |
| option: with forklift pockets for containers up to 7.335 mm |
| holes distance 1.506mm |
| container roof construction |
| 50 mm poliurethane panel, externally microcorrugated RAL 9002 |
| internally smooth RAL 9010 (white) |
| option: 60 mm mineral wool, bothside plastificated in RAL 9002 |
| option: 60 mm mineral wool, bothside plastificated in RAL 9002, internally enriched chipboard 100 WHITE010 (white) |
| option: 80 mm poliurethane panel, bothside plasticated steel plate RAL 9010 (white) |
| option: 100 mm poliurethane panel, bothside plasticated steel plate RAL 9010 (white) |
| option: 100 mm mineral wool, bothside plasticated steel plate RAL 9010 (white) |
| option: 120 mm mineral wool, bothside plasticated steel plate RAL 9010 (white) |
| container exterior and inner walls |
| PVC with polyurethane filling 40 mm, clear opening 79/202 cm |
| container windows and doors |
| option: windows without shutters |
| option: windows with shutters |
| container isolation, coefficient of thermal resistance |
| floor - U = 0,37 W / m2k |
| roof - U = 0,39 W /m2k |
| wall panels - U = 0,41 W /m2k |
| windows - U = 2,40 W / m2k |
Individual container modules
They are assembled in our own factory production .They come to the market as finished product as residential or office space equipped with or without equipment. Individual container modules are used as a single objects as bungalows, dormitories, offices, warehouses, shops, workshops and a built MODULE for the construction of various shapes and purposes.
Audited Supplier 
){kind=link}